Shindaiwa PowerBroom PS344 Manuel de l'opérateur télécharger pdf (Page 14)

When sweeping narrow areas such

as sidewalks, the PowerBroom can be

used to throw material directly ahead of

the operator. Clearing wider areas may

require sweeping at an angle to create

windrows to one side of the path being

cleared.

Windrows of lighter materials often

can be combined into one main row or

pile for eventual pickup, while heavy

or bulky material may need to be col-

lected row-by-row.

To pull debris from corners, reverse

sweeper drum rotation by turning the

powerhead over (throttle facing “up”).

DIRECTION OF

ROTATION

Sweeping

corners with the

PowerBroom upside

down

Sweeping Windrows

Adjustment Knob

…loosen the adjustment

knob to reverse the

handle.

For long-term inverted

operation…

Operating Techniques

Operate the PowerBroom at or near full

throttle with its sweeper ns resting on

the work surface.

IMPORTANT!

It is both tiring and unnecessary to lift

or hold the ns from the work surface

during sweeping.

WARNING!

Reversing the PowerBroom

will cause debris to be thrown back

toward the operator. When revers-

ing the PowerBroom, use lower

throttle settings and be aware that

thrown debris may also affect your

footing!

Operating continued)

14

Mufer

This unit must never be operated with

a faulty or missing spark arrester or

mufer. Make sure the mufer is well

secured and in good condition. A worn

or damaged mufer is a re hazard and

may also cause hearing loss.

Spark Plug

Keep the spark plug and wire connec-

tions tight and clean.

Fasteners

Make sure nuts, bolts, and screws

(except carburetor adjusting screws)

are tight.

Air Filter

The H4 engine that powers your

Shindaiwa model is a hybrid 4-stroke

engine. As a hybrid, the engine is

lubricated by oil mixed with the gaso-

line and air from the carburetor that

moves through and around the inter-

nal parts of the engine in a similar way

that a 2-stroke engine is lubricated.

Without the heavy duty 2-stage air l-

ter equipped on all H4 engines, dust

and dirt could also move through the

engine, decreasing engine life, increas-

ing valve wear and the need for more

frequent valve adjustments. To keep

your H4 engine strong and reliable,

Shindaiwa recommends that you check

and service the air lter as instructed in

the 10-Hour Maintenance section that

follows

Maintenance

WARNING!

Before performing any

maintenance, repair, or cleaning work

on the unit, make sure the engine and

cutting attachment are completely

stopped. Disconnect the spark plug

wire before performing service or

maintenance.

WARNING!

Non-standard accessories,

cutting attachment, or replacement

parts may not operate properly with

your unit and may cause damage

and lead to personal injury.

IMPORTANT!

MAINTENANCE, REPLACEMENT OR

REPAIR OF EMISSION CONTROL

DEVICES AND SYSTEMS MAY BE

PERFORMED BY ANY REPAIR ESTAB

-

LISHMENT OR INDIVIDUAL; HOW-

EVER, WARRANTY REPAIRS MUST

BE PERFORMED BY A DEALER OR

SERVICE CENTER AUTHORIZED

BY ECHO, INC. THE USE OF PARTS

THAT ARE NOT EQUIVALENT IN PER

-

FORMANCE AND DURABILITY TO

AUTHORIZED PARTS MAY IMPAIR THE

EFFECTIVENESS OF THE EMISSION

CONTROL SYSTEM AND MAY HAVE

A BEARING ON THE OUTCOME OF A

WARRANTY CLAIM.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Commentaires sur ces manuels

Pas de commentaire