Shindaiwa 400 Manuel de l'opérateur télécharger pdf (Page 28)

- 28 -

 Replace LLC every 2 years or 1000 hours

Mixture ratio (for reference only) :

Ambienr

temperature

(Celsius)

-15

-20

-30

Mixture ratio

30% 35% 45%

8.2.3 Coolant Capacity

( Unit: L)

Total Coolant Volume ( including reservoir tank)

22.8 (1.5)

The value of ( ) shows the reservoir tank`s volume.

8.3

Checking Fan Belt

Also refer to the user’s manual for Engine separately

:Injuries

 Before performing any equipment check or maintenance, stop the engine,

and remove the engine key. A person performing the maintenance should always

keep the key.

 Close all doors and place locks during operating this equipment, to avoid injuries

by unintentionally touching cooling fan and fan belt.

:Burns

 Do not touch the engine and muffler during operation and immediately after stopping

the equipment, for the temperature can reach extremely high

8.3.1 Tension

Tension should be optimum when the fan belt has 10 to

15mm slacks, when applying finger pressure (about

98N{approximately 10kgf}) at midpoint between fan

pulley and alternator pulley.

Danger

Caution

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

Pas de commentaire

Shindaiwa 400 Manuel de l'opérateur Page 28