Shindaiwa 65010 Manuel de l'opérateur

SHINDAIWA OWNER’S/OPERATOR’S MANUALMULTIPURPOSE EDGER TOOL 65010X750288040212/1065010-94010_MLE230_07LP 11/21/01, 11:19 AM4Minimize the risk of injury

10Inspect the Gearcase ProtectorThe metal gearcase protector (L) is installed to protect the gearcase ange from damage when working close to sidewalk

11

ECHO Incorporated.400 Oakwood RoadLake Zurich, IL 60047-1564 U.S.A.Telephone: 1-877-986-7783Fax: 1-847-540-8416www.shindaiwa.com Yamabiko Corporation

2IntroductionThe Multipurpose Edger Tool has been designed and built to deliver supe-rior performance and reliability without compromise to quality, c

3This machine operates at very high speeds and has the potential to do serious damage if misused, abused or mishandled. To reduce the risk of injury,

4Avoid long-term operation in very hot or very cold weather.Make sure bystanders or observers outside the 15 meters “danger zone” wear eye protecti

565010-94010_MLE230_07LP 11/21/01, 11:19 AM9Product DescriptionUsing the illustration as a guide, familiarize yourself with your machine and its vari

6AssemblyMount the Cutting Attachment Shield on the GearcaseRemove the shaft bolt, bolt guard, holder A and holder B from the gearcase. 1. Align the c

7Mount the Edger BladeInstall the holder (A) onto the output shaft (D). 1. Mount the edger blade (C) and holder (B) onto the output shaft, and then 2

8Prior to each work day, perform the following:Check for loose or missing screws or components. Make sure the cutting attachment is clean, free of d

9Edger BladesCheck the edger blades condition frequently. If an edger blade’s performance changes suddenly, stop the engine and check the blade for cr