Shindaiwa 78702 Manuel de l'opérateur

SHINDAIWA OWNER’S/OPERATOR’S MANUALMinimize the risk of injury to yourself and others! Read this manual and familiarize yourself with the contents.

10WARNING!Before performing any maintenance, repair, or cleaning work on the unit, make sure the engine and cutting attachment are completely stopped.

11 Lubricate the gearcase. To perform this operation, first remove the gearcase from the upper outer tube as follows.CAUTION!Do not remove the D-shap

12A30°90°(TOP PLATE ANGLE)(DEPTH GAUGE)(TOP PLATE CUTTING ANGLE)Sharpening InstructionsIMPORTANT!File all the cutters to the same angle and depth! Une

13ADDITIONAL PROBLEMSSymptomPossible CauseRemedyTroubleshooting GuideEngine idle too high.Broken clutch spring or worn clutch spring boss.Warped or da

14NOTES

15NOTES

ECHO Incorporated.400 Oakwood RoadLake Zurich, IL 60047-1564 U.S.A.Telephone: 1-877-986-7783Fax: 1-847-540-8416www.shindaiwa.com Yamabiko Corporation

2Throughout this manual are special at-tention statements. DANGER!A statement preceded by the trian-gular attention symbol and the word “DANGER” indi

3CAUTION! Always maintain the Multipurpose Pole Pruner Tool according to this owner’s manual and follow the recommended scheduled maintenance.  Ne

4Safety LabelsIMPORTANT!Safety and Information Labels: Make sure all safety and information labels are undamaged, readable and up to date. Immediately

5Product DescriptionIMPORTANT!The terms “left”, “left-hand”, and “LH”; “right”, “right-hand”, and “RH”; “front” and “rear” refer to directions as view

6SpecicationsLength ... 222 mm (8.7 in)Width ...

7Installing and Adjusting the Bar and ChainInstalling The Chain WARNING!Never attempt to install, replace, or adjust the chain with the engine runnin

8WARNING!Never attempt to install, replace, or adjust the chain with the engine running. WARNING!The saw chain is very sharp. Wear gloves to protect

9Adjusting Oil Flow RateDERelieving Cut:To avoid tearing the bark, kickback or pinching the bar when pruning thick branches, always start by performin