Shindaiwa 326T Manuel de l'opérateur télécharger pdf (Page 20)

English

AIR FILTER

Close choke (Cold Start Position [1. ]). This prevents dirt from

entering the carburetor throat when the air lter is removed. Brush

accumulated dirt from air cleaner area.

Remove air lter cover. Brush dirt from inside cover.

Remove air lter and lightly brush debris from lter. Replace lter if it 3.

is damaged, fuel soaked, very dirty, or deformed.

Install air lter cover.4.

AUTOMATIC OILER

The discharge volume of the automatic oiler is adjusted to 6 to 7 cc/ ■

min (@ 7000 rpm) prior to shipment from the factory.

Always check oil discharge when in use. ■

Turn adjusting screw (D) counter-clockwise to increase oil volume, ■

clockwise to decrease oil volume.

OIL STRAINER

Check periodically. ■

Do not allow dust to enter oil tank.1.

Clogged oil strainer will affect the normal lubricating system2.

Using a wire bent into the shape of a hook, pull strainer out 3.

through oil port and inspect strainer.

If the strainer is dirty, clean with suitable cleaning uid.

If the inside of the oil tank is dirty, rinse with suitable cleaning uid. 5.

FUEL STRAINER

Do not allow dust to enter fuel tank. 1.

Clogged strainer will cause difculty in starting engine or abnor-2.

malities in engine performance.

Using a wire bent into the shape of a hook, pull strainer out

through gas port, and inspect strainer.

If the strainer is dirty, clean with suitable cleaning uid.

If the inside of the tank is dirty, rinse with suitable cleaning uid. 5.

GUIDE BARS AND OIL HOLES

Follow instructions for “Guide Bar and Saw Chain: Install/Remove”. ■

Clean after each use ■

Clean the grooves (A) of the guide bar with a small screwdriver. -

Clean oil holes (B) with a wire. -

NOTE:

Symmetrical shaped Guide Bars should be inverted each time the

chain is removed to extend guide bar life

Air lter

Automatic

oiler

Oil strainer

Fuel strainer

Guide bars and oil holes

Maintenance, continued

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 89 90

Commentaires sur ces manuels

Pas de commentaire

Shindaiwa 326T Manuel de l'opérateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à chaîne Shindaiwa 326T