Shindaiwa 400 Spécifications télécharger pdf (Page 16)

(1) Filling the Sub Tank

1 Remove the sub tank cap.

2 Add coolant to the FULL level.

3 Re-install the cap.

Sub Tank

(2) Filling the Radiator

1 Remove the top plate.

2 Remove the radiator cap.

3 Add coolant to the top.

4 Re-install the radiator cap.

5 Re-install the top plate.

• Use soft water, such as tap water.

• If the ambient temperature is near freezing, use Long Life Coolant (LLC) at a mixture ratio of

30%-45%, depending on the ambient temperature.

• This equipment has a 30% mixture ratio of LLC when shipped from the factory.

• Replace LLC at yearly intervals or 2000 hours of operation whichever comes first.

Suggested LLC Mixture Ratio

Radiator Cap

Top Plate

Radiator Fill

Lowest Ambient

Temperature

+5ºF -4ºF -22ºF

Mixture Ratio 30% 35% 45%

8-3 Checking Fuel

Caution: Fire

• Do not operate this equipment with any fuel leak. Wipe up any spilled fuel immediately.

Fuel tank level is indicated on an illuminated fuel gauge on the control panel. Check the fuel level prior to

starting and refill if necessary.

• Use Diesel fuel, ASTM D975 No.2-D.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 32 33

Pas de commentaire

Shindaiwa 400 Spécifications Page 16