Shindaiwa 400 Spécifications télécharger pdf (Page 28)

1. Oil Change

Frequency

First Time 50 hours

Time and

thereafter

Every 100 hours

Procedure

1. Remove the oil fill cap.

2. Remove the oil drain plug.

Oil will begin to drain as soon as the oil drain plug is loosened. Ensure there is adequate means

to contain the used oil that is being drained.

3. Once the oil is completely drained, reinstall the oil drain plug.

4. Fill the oil to the max level as measured by the dipstick (approximately 4.7 quarts).

5. Reinstall the oil fill cap hand tight.

• Refer to Section 6-1 Checking Engine Oil for the proper weight oil to use.

• Change the packing, whenever changing oil.

• Part No. 6C090-58961 (Kubota part no.)

2. Oil Filter Change

Frequency

First Time 50 hours

Time and

Thereafter

Every 200 hours

Procedure

1. Completely drain the engine oil.

2. Loosen and remove the oil filter.

3. Dampen the new oil filter gasket with clean engine oil.

4. Screw the new filter (Kubota part no. 16271-32090) into place and tighten it by hand until the

gasket contacts the seat. Give it an additional 1 1/4 Turns to seat the new filter, using an oil filter

wrench.

5. Fill the oil to the max level as measured with the dipstick.

Dipstick

Oil Drain Plug

Oil FillSide Door

Gasket

Oil Filter

1 2 ... 23 24 25 26 27 28 29 30 31 32 33

Pas de commentaire

Shindaiwa 400 Spécifications Page 28