Shindaiwa BCK-11 Manuel de l'opérateur télécharger pdf (Page 4)

Assembly

Removing the Existing Cutting Attachment Shield

1. Remove the four socket-head cap screws (A),

bracket (B) and two shims (C).

2. Remove the cutting attachment shield from the

gearcase.

Remove Handle Assembly

1. Turn the unit over so that the gearcase output shaft faces UP.

2. Align the hole in the holder (A) with the notch in the gearcase ange, and

then temporarily lock the output shaft by inserting a hex wrench through

both holes.

3. While holding the hex wrench turn the trimmer head clockwise to remove.

4. Remove the hex wrench.

Remove Cutting Attachment

26107

1. Remove handle assembly. Retain all parts for

future use.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Shindaiwa BCK-11 Manuel de l'opérateur Page 4